Fine concrete for artists, for modeling, VIVA DECOR, 1.5 kg
Product code: 940500098
Modelling concrete is a low-dust, improved plasticized and fibre-reinforced concrete modelling clay that is weather and frost resistant after hardening. The particularly fine texture of the concrete modelling clay allows filigree structures to be modelled.
- Air drying
- For fine structures
- Low dust content: Can be used cleanly indoors
Use:
Instructions: Take the required amount of water in a mixing ratio and knead the concrete powder well little by little with a suitable tool (e.g. a flat knife) until a uniform and smooth concrete mass is formed. Let it rest for about 2 minutes, then mix again or knead well.
The kneading concrete can be modelled freely for about 1 hour (wear gloves!). If necessary - for easy modelling - slightly moisten the fingertips with water. The mass can be stretched, pressed, shaped using stamp impressions or simply modeled freely.
Depending on the thickness of the layer, the drying time can be several hours. Large objects should take several days to dry completely. Additional colored model only after the modeling clay is completely dry. To protect the concrete powder from moisture, close the container immediately after removing the powder. Store in a dry place, away from moisture.
Contents: 1 container with 1.5 kg of creative concrete.
May cause skin irritation, serious eye damage, respiratory irritation. Keep out of reach of children. Avoid inhaling dust. Wear gloves to protect hands, eyes, and face.
Română