UHU dual component epoxy adhesive 45585, 25g
Very strong two-component adhesive based on epoxy resins, suitable for heavy loads.
It is ideal for metal, stone, concrete, marble, porcelain, ceramics, wood, glass, ivory, pearls, precious stones, synthetic materials (polyester-PS, bakelite, ant, hard plastic, fiberglass, acrylic glass, rigid PVC, reinforced plastic, rubber or extruded polystyrene (Styrofoam®)). Not recommended for: large surfaces of glass, polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.
The adhesive is ideal for gluing polymer paste on cups or cutlery.
- The solder is resistant to impact, aging and is stable at temperatures (from -20 ° C to + 100 ° C);
- It is suitable for heavy loads;
- It is resistant to moisture, oils, dilute acids and alkalis.
UHU adhesive 45585 use
The surfaces to be glued must be clean and degreased. Smooth surfaces will be sanded. Loosen the cover and seal. Squeeze and remove the adhesive and hardener in equal amounts 1: 1 and then mix them well. After mixing, apply on one or both sides if the materials are absorbent. Secure the two parts without pressing. Processing time: 2 hours at room temperature (minimum 90 minutes).
For the manufacturer page, click here: UHU epoxy adhesive 45585.
Two-component epoxy 45585 price
Price on 1 syringe with 24 ml (25 g).